Arduino Shields & Boards

We are a leading Importer of arduino 16 channel servo shield, arduino mega 2560 electronic development board, arduino uno case, arduino w5110 ethernet shield, uno servo shield and arduino cnc shield v3.0 from Vadodara, India.

Arduino 16 Channel Servo Shield

  • Foil Print

499/Piece Get Latest Price

Product Brochure
Size54 x 70 x 3 mm
Adjustable Frequency PWM1.6 KHz
Channel16 Channel
Microcontroller3.4 V
Resistors330 Ohm
Packaging TypeBox

The Arduino 16 Channel Servo Shield is an accessory for the popular Arduino microcontroller platform. It provides a convenient way to interface 16 servo motors with an Arduino board. The shield fits on top of an Arduino board and connects to it through the standard headers. The shield has 16 connectors, each of which can be used to control a servo motor, making it ideal for projects that require multiple servo motors such as robots, animatronics, and other automated systems

Arduino Mega 2560 Electronic Development Board

2750/Piece Get Latest Price

Product Brochure
Analog Input Pins16
Weight37 gm
Model Name/NumberMega 2560
Flash Memory256 KB
Operating Voltage5 V
Digital I/O Pins54 (of which 15 provide PWM output)
Input Voltage12 V
Clock Speed16 MHz

The Arduino Mega 2560 is designed for projects that require more I/O lines, more sketch memory and more RAM. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities maintaining the simplicity and effectiveness of the Arduino platform.

The Arduino Mega 2560 is programmed using the Arduino Software (IDE), our Integrated Development Environment common to all our boards and running both online and offline.

Arduino Uno Case

199/Piece Get Latest Price

Product Brochure
Input Voltage (limits)6-20 V
Packaging TypeBox
Weight10 gm
Part numberSRG0161

We are engaged in offering the high quality range of Arduino UNO Case to our valuable customers.

Arduino W5110 Ethernet Shield

699/Piece Get Latest Price

Product Brochure
Output Voltage (VDC)12 VDC
Length11 mm
Width8 mm
Connection Speed100 MB
Model Name/NumberW5110
Wireless2.4 GHz 802.11n wireless LAN
Packaging TypeBox

The Arduino Ethernet Shield V1 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.

The Arduino Ethernet Shield V1 allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

Uno Servo Shield

430/Piece Get Latest Price

Product Brochure
Packaging TypeBox
USB 2.0 Ports1
Digital I/O Pin14
Weight23 gm
Input Voltage5 V
Dimensions8 x 4 x 10 cm
Country of OriginMade in India

Established in year 1985, we "Lovely Electronics" are the leading Wholesale Trader, Manufacturer and Importer of DC Motor, Lithium Battery, Lithium Ion Battery, SAFT Battery, Tadiran Battery, Raspberry Pi Electronic Boards, etc. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers.

Arduino CNC Shield V3.0

1995/Piece Get Latest Price

Product Brochure
Digital I/O Pin14
Axis3 Axis (X, Y, Z)
Pitch Size11257 mm
Packaging TypeBox
Model Name/NumberLBA-B-V4

We are engaged in offering high quality range of Arduino CNC Shield V3.0 to our valuable customers.

I/O Pro Shield

499/Piece Get Latest Price

Product Brochure
Weight35 gm
USB 2.0 Ports1
Digital I/O Pin14
Packaging TypeBox
Continuous Output Current1.2 Amp
Voltage5.5 V

We are engaged in offering the high quality range of I/O Pro Shield to our valuable customers.

Arduino UNO Prototype Board

599/Piece Get Latest Price

Product Brochure
Mini Breadboard Size47 x 35 x 9 mm
Masking ColorWhite
Min Hole Size3 mm
Packaging TypeBox
Prototype Size69 x 53 x 18 mm

We are engaged in offering high quality Arduino UNO Prototype Board to our valuable customers.

Arduino Leonardo Board

2095/Piece Get Latest Price

Product Brochure
Input Voltage (limits)6-20 V
DC Current For 3.3V Pin50 mA
Packaging TypeBox
Clock Speed16 MHz
DC Current per I/O Pin40 mA
Flash Memory32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM2.5 KB (ATmega32u4)
Operating Voltage5 V
EEPROM1 KB (ATmega32u4)
Weight20 gm
Input Voltage (Recommended)7-12 V
Length68.6 mm
Width53.3 mm
Digital I/O Pins20
PWM Channels7

The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board.

Arduino SN74HC595 Motor Control Shield

409/Piece Get Latest Price

Product Brochure
ConfigurationSerial-in, Parallel-out
Input TypeStandard CMOS
Output Type3-State
Clock Frequency24 MHz
Model Name/NumberSN74HC595

The SN74HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state.


  • 8-bit serial-in, parallel-out shift
  • Wide operating voltage range of 2 V to 6 V
  • High-current 3-state outputs can drive up to 15 LSTTL loads
  • Low power consumption: 80-µA (maximum) ICC
  • tpd = 13 ns (typical)
  • ±6-mA output drive at 5 V
  • Low input current: 1 µA (maximum)
  • Shift register has direct clear
  • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

Adk Usb Host Shield

1300/Piece Get Latest Price

Product Brochure
Memory32 KB
Packaging TypeBox
Current Rating200 mA
Voltage12 V
Storage Humidity80%
Dimension1.85 x 2.11 cm

The ADK USB Host Shield compatible with Arduino is based on the MAX3421E, which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0.

It is compatible with more Arduinos – not only UNO and Duemilanove but also Mega and Mega 2560 work with a Standard variant of this shield out of the box. No more SPI re-wiring and code modifications – just solder included stackable connectors (2×3 ICSP connector’s female side should be facing down), plug and play! Using Arduino Compatible USB HOST function, let your Arduino communicate with other USB devices, and supports USB HUB function.

USB Host shield adds USB Host capabilities to the Arduino board. They are large no of USB Host shield which is available in the market but the only problem is that you have to choose the right host shield. Before using that, first of all, you should know, what is a USB Host shield? The USB protocol defines two types of devices.


  • Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
  • Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
  • Supports HID devices, such as keyboards, mice, joysticks, etc.
  • Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).

Data Logging Shield V1.0

1499/Piece Get Latest Price

Product Brochure
Height24 mm
Weight25 mm
Voltage3.3 V
USB 2.0 Ports1
Length68 mm
Width54 mm
Packaging TypeBox

Here's a handy Arduino shield: we've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. This shield makes it easy to add a 'hard disk' with gigabytes of storage to your Arduino!

Our latest version of this popular shield has all the features of the popular original, and is "R3" compatible so you can use it with just about any Arduino or compatible. You can be up and running with it in less than 15 minutes - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program. This tutorial will also show you how to use two free software programs to plot your data. The included RTC (Real Time Clock) can be used to timestamp all your data with the current time, so that you know precisely what happened when!

The data logger is a reliable, well-rounded and versatile design. It is easily expanded or modified and come well supported with online documentation and libraries.


  • SD card interface works with FAT16 or FAT32 formatted cards. Built in 3.3v level shifter circuitry lets you read or write super fast and prevents damage to your SD card
  • Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The coin cell battery backup lasts for years
  • Included libraries and example code for both SD and RTC mean you can get going quickly
  • Prototyping area for soldering connectors, circuitry or sensors.
  • Two configurable indicator LEDs
  • Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run
  • Uses the "R3 layout" I2C and ICSP/SPI ports so it is compatible with a wide variety of Arduinos and Arduino-compatibles

With this new version you can use it with:
  • Arduino UNO or ATmega328 compatible - 4 analog channels at 10 bit resolution, 6 if RTC is not used
  • Arduino Leonardo or ATmega32u4 compatible - 12 analog channels at 10 bit resolution
  • Arduino Mega or ATmega2560 compatible - 16 analog inputs (10-bit)
  • Arduino Zero or ATSAMD21 compatible - 6 analog inputs (12-bit)
  • Arduino Due compatible - 12 analog inputs (12-bit)

Mega Prototype Shield

399/Piece Get Latest Price

Product Brochure
Breadboard Size48 x 34 mm
Weight35 gm
USB 2.0 Ports1
Packaging TypeBox
Breadboard Points170
Shield Size102 x 56 mm

We are engaged in offering high quality range of Mega Prototype Shield to our valuable clients.

Arduino Motor Shield

150/Piece Get Latest Price

Drive Part of the Operating Current2 Amp
Maximum Dissipation Power25 W
Length70 mm
Packaging TypeBox
Logic Part Input Voltage5 V DC
Drive Part of the Input Voltage12 V DC

We are engaged in offering high quality range of Arduino Motor Shield to our valuable clients.

Sensor Shield V5.0

318/Piece Get Latest Price

Packaging TypeBox
Mounting TypeFixed
Voltage12 V
Board Thickness2.54 mm

The Sensor Shield V5.0 for Arduino is the latest shield compatible to Arduino UNO and Arduino Due. This Sensor Shield retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology. Newly added many kinds of interface, for example, IIC interface, 32 channels servo motor interface, Bluetooth communication module interface, SD Card communication module interface and so on, more convenient.

Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers and many more directly to your Arduino through this Sensor Shield.

Each functional module has buckled port with VCC, GND, and Output, which has the corresponding port on the Sensor Shield, connected with a dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.

You can easily connect with usual analog sensors by using this expansion board, such as ray sensor. If you support by this expansion board and the corresponding circuit module, you only need to combine Arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by the program in Arduino.

For Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program downloaded to the Arduino Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.


  • Ready to  plug & play.
  • It can connect to various modules like sensors, servos, relays, buttons, potentiometers
  • Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.

RAMPS 1.4 3D Printer Controller Shield

499/Piece Get Latest Price

Width60 mm
Input Supply Voltage (VDC)12 VDC
Length100 mm
Shipment Weight0.064 kg
Shipment Dimensions12 x 6 x 4 cm
Packaging TypeBox

RepRap Arduino Mega Pololu Shield, known affectionately as RAMPS, is the brain for most of the 3D printers. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost.

RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on a single Arduino MEGA shield. It uses Pololu Stepper Drivers delivering up to 1/16 microstepping. Four drivers are needed to move most 3D printers, with 3 going to the axis & one driving the extruder. An optional fifth stepper driver socket has been provided for additional applications.The board has 3 high power switched (By MOSFETS) outputs fused to 5 A and 11 A outputs for printbed and extruder.


  • Upto 5 stepper motor driver outputs
  • 3 PWM controlled MOSFET powered outputs
  • Heated bed control and extruder control pins with 11A fuse
  • 6 sets of Digital Pins in headers with VCC and GND for endstops
  • Extra pins broke out : PWM, digital, serial, SPI, I2C and analog

XBee Pro Nano 10 Expansion Board

338/Piece Get Latest Price

Product Brochure
Output Voltage3.3 V
Height14 mm
Width50 mm
Packaging TypeBox
Weight30 gm
Length74 mm

We are engaged in offering high quality XBee Pro Nano 10 Expansion Board to our valuable clients.


Contact Us

Pamnani Paras (Owner)
2nd Floor Lovely House, Rajmahal Road
Near Marimata's Lane, Vadodara - 390001, Gujarat, India

Get Directions
Send Email
Thank youYour Enquiry has been sent successfully.