Robotskull

• Do not attempt to disassemble open or service the battery pack
• Do not crush punctureshort external contacts or dispose of in fire or water
• Do not store above 60 Degree C (140 Degree F)

• Replacement for BP-122, BP-123, CS2312AVBNC, LC-SA122R3AU
• LC-SA122R3BG, LCT-1912ANK, PV-BP88A, SBC-5215
• VIPA-1223-WP, VW-VBM10E, VW-WBM7E, WP1223A.

Proximity sensing is a very common application in electronics.

There are several ways to accomplish this. The most common way is by using a PIR sensor. PIR Sensor senses the change in ambient infrared radiation caused by warm bodies. I have already covered this in my Tutorial No. 5: "PIR Sensor Tutorial - With or Without Arduino". However, since PIR sensors detect movement from living objects, they can generate false alarms. These sensors are also inefficient in hot environments, as they rely on heat signatures.

The other common methods of proximity sensing involve, using reflected ultrasonic or light beams. Using these sensors, the intruding object is detected by the reflected beam back to its source. The time delay between transmission and reception is measured to calculate the distance to the object.

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

• AI Performance: 275 TOPS
• GPU: NVIDIA Ampere architecture with 2048 NVIDIA CUDA cores and 64 tensor cores
• CPU: 12-core Arm Cortex-A78AE v8.2 64-bit CPU 3MB L2 + 6MB L3
• Memory: 32GB 256-bit LPDDR5 | 204.8 GB/s
• Storage: 64GB eMMC 5.1

• AI Perf: 472 GFLOPS
• GPU: 128-core NVIDIA Maxwell™
• CPU: Quad-core ARM A57 @ 1.43 GHz
• Memory: 4GB 64-bit LPDDR4 25.6GB/s
• Storage: microSD (Card not included)

The Samsung 25R 18650 2500mAh 20A battery is a lithium-ion battery commonly used in electronic devices. It has a capacity of 2500mAh and a discharge rate of 20A, making it a reliable and long-lasting choice for high-powered devices. However, proper handling and charging are crucial to avoid potential dangers.

• Product Model No: FT-7115-C001
• Structure Size: 40.16mm x 20.16mm x 40.05mm
• Maximum Speed: 0.161 sec/60°@7.4V
• Stall Torque: 19.5kg. cm@7.4V

• Rotation Degree: 180°

• Do not crush, heat, incinerate, short circuit, immerse in any liquid or it may vent or rupture.
• Do not charge below 0 degree C.
• Discharge -20 degree C to +60 degree C.

• This battery pack is suitable for various applications and can be used with most hobby equipment, such as solar outdoor light security light amphibious stunt rc car.
• This battery pack made of 5 cells high-capacity Ni-Cd AA batteries with perfect performance and long service life.
• This battery pack can be used as a good replacement for damaged or old batteries.
• Battery pack size: 51 x 45 x 27 mm / 2 x 1.77 x 1.06 inch, and built-in standard SM 2-pin connector.
• Please make sure your device battery is the same size and connector as the picture shows before you buy it.

• Rechargeable Li-Po Battery with Deans Connector
• Spare Battery to suit RC Cars and Trucks
• Replacement Lithium Polymer Battery to suit  WL Toys RC models K949, 10428, 124018 and 124019. 
• Also a great upgrade battery for the WL Toys 144001

• CHIP: ISD1806 6S; Zero-power message storage Eliminates battery backup circuits 100-year message retention (typical) 100,000 record cycles (typical) On-chip oscillator No algorithm development required
• Voltage: 3-4.5V; 0.5 µA standby current (typical)
• Driving Loudspeaker: 0.25-2W/8 ohm
• Easy-to-use single-chip, single-message voice record/playback solution
• Automatic power-down mode Enters standby mode immediately following a record or playback cycle On-chip 8Ω speaker driver

• HLK-LD116-24G Millimeter MM Wave Ranging Range Radar Sensor Module LD116 24G Motion Detection Distance Sensor

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

The Mastech MS8268 is a digital multimeter used for measuring electrical properties in AC/DC circuits. It features auto and manual ranging, a large LCD display, and measures voltage, current, resistance, capacitance, frequency, and duty cycle. It also has diode and continuity test functions and safety features such as overload protection.

The Mastech MS8910 Smart SMD Tester is a handheld device used for measuring and identifying surface-mount device components. It has a high-contrast LCD display, auto-detection function, and measures capacitance, resistance, and diode forward voltage. It's powered by a 3V CR2032 button cell battery and is compact and portable. It's a useful tool for electronics enthusiasts and professionals working with SMD components.

The Mastech MAS830L is a portable digital multimeter used for measuring voltage, current, resistance, continuity, and diode testing. It has a 3-1/2 digit LCD display and features a data hold and auto power off function. It is rugged and comes with test leads and a protective rubber holster. It is suitable for electronics, automotive, and household applications.

The Mastech MS833 is a portable and easy-to-use digital multimeter that measures DC/AC voltage, current, resistance, continuity, and diode testing. It has auto-ranging, data hold, and overload protection features, with a large LCD display and low battery indication. It's a versatile and reliable tool for both professional and amateur users.

The Mastech MY60 is a handheld digital multimeter used for measuring voltage, current, resistance, capacitance, frequency, and duty cycle. It has safety features such as overload protection, input polarity protection, and a non-contact voltage detector. The MY60 also has a data hold function, relative measurement mode, and a sturdy design.

• Cross Reference ( Also known as ) : G27A / MN27 / GP27A / A27 / L828 / EL812 / EL-812 / CA22 / B-1 / SNN4176A / ALK27A / A27BP / K27A / V27GA / VA27GA / VR27 / MN27 / MS27 / R27A.
• Works in: Garage door openers, home security systems, Remote control devices, lighters, electronic door locks, and automotive keychain remotes, radio devices, keyless vehicle entry systems, and Bluetooth headsets
• 12V Alkaline Batteries Sealed In Original 10 Pcs.