Robotskull

• Broadcom BCM2835 SoC
• 1GHz, single-core CPU
• 512MB of LPDDR2 RAM
• Dual-band 802.11 b/g/n wireless LAN
• Bluetooth 4.1, BLE
• Mini-HDMI port
• 40-pin GPIO header
• Supports Raspberry Pi OS, Ubuntu and other operating systems
• Ideal for small, low-power projects, such as wearable electronics, mini game consoles, and IoT devices.

• Broadcom BCM2837 64-bit quad-core ARM Cortex-A53 CPU clocked at 1.2GHz
• 1GB of LPDDR2 RAM
• GPU capable of supporting OpenGL ES 3.0 graphics
• Dual-band 802.11n wireless LAN
• Bluetooth 4.1, BLE
• 10/100 Ethernet
• 4 USB 2.0 ports
• 40 GPIO pins
• Full-sized HDMI port
• 3.5mm audio jack
• Supports Raspberry Pi OS, Ubuntu and other operating systems
• Ideal for a wide range of projects, such as media centers, game consoles, and DIY smartphones.

• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz

• 1GB of LPDDR2 RAM
• Dual-band 802.11ac wireless LAN
• Bluetooth 4.2, BLE
• Gigabit Ethernet
• 4 USB 2.0 ports
• 40 GPIO pins
• Full-sized HDMI port
• 3.5mm audio jack
• Improved power management with upgraded voltage regulator

• Supports Raspberry Pi OS, Ubuntu and other operating systems

The Samsung 30Q 18650 3000mAh 15A - Button Top Battery is a reliable and high-performance rechargeable lithium-ion battery with a capacity of 3000mAh and a maximum continuous discharge current of 15 amps. Its "button top" makes it compatible with certain devices, and it has built-in safety features for protection against overcharging, over-discharging, short circuits, and thermal events.

• RP2040 microcontroller with 2MB of flash memory
• On-board single-band 2.4GHz wireless interfaces (802.11n)
• Micro USB B port for power and data (and for reprogramming the flash)
• 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
• Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
• 23 GPIO are digital-only, with three also being ADC capable
• Can be surface mounted as a module
• 3-pin ARM serial wire debug (SWD) port
• Simple yet highly flexible power supply architecture
• Various options for easily powering the unit from micro USB, external supplies or batteries
• High quality, low cost, high availability
• Comprehensive SDK, software examples, and documentation
• Dual-core Cortex M0+ at up to 133MHz
• On-chip PLL allows variable core frequency
• 264kByte multi-bank high-performance SRAM

• Processor: Broadcom BCM2835 SoC, 1GHz ARM11 core
• Memory: 512 MB RAM
• Wireless Connectivity: 802.11b/g/n wireless LAN, Bluetooth 4.1
• Video Outputs: Mini-HDMI port
• Data and Power Input: Micro-USB On-The-Go (OTG) port
• Power Input: Micro-USB port (minimum 500mA)
• GPIO: 40-pin header (unpopulated)
• Camera Connector: CSI camera connector
• Composite Video Out: RCA composite video header
• Storage: MicroSD card slot
• Dimensions: 65mm x 30mm x 5mm
• Weight: 9 grams
• Operating System: Raspberry Pi OS (32-bit version) pre-installed, but other operating systems can also be installed.

• 8 inch display with a capacitive touch screen
• High resolution of 1280x800 pixels
• IPS (In-Plane Switching) panel for wide viewing angles and accurate color reproduction
• Compatible with Raspberry Pi mini-computer
• Supports multiple operating systems including Raspberry Pi OS, Ubuntu, and Windows 10 IoT.
• Easy plug-and-play installation with no additional drivers required.
• Sleek and compact design with a thickness of only 9mm.
• Durable construction with a sturdy metal casing.

• Product Model: Waveshare 10.1 inch Capacitive Touch LCD (F).

• Processor: Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz
• RAM: 4GB LPDDR5
• Connectivity: Dual-band 802.11ac wireless, Bluetooth 5.0, BLE, Gigabit Ethernet, 2 USB 3.0 ports, 2 micro-HDMI ports (up to 4Kp60 supported)
• Storage: MicroSD card slot for loading operating system and data storage
• GPIO: 40-pin GPIO header, populated
• Power: 5V DC via USB-C connector (minimum 3A), GPIO header (minimum 3A), Power-over-Ethernet (PoE) enabled (requires separate PoE HAT)
• Dimensions: 286 mm x 122 mm x 23 mm / 11.26 in x 4.80 in x 0.91 in
• Operating System: Raspberry Pi OS (64-bit version) pre-installed by default, other operating systems can also be installed.
• Keyboard: Integrated full-sized keyboard with multi-language support and UK, US, French, German, Italian, Spanish and Japanese layout options.

• Interfaces: USB 2.0, USB 3.0, HDMI, 40-pin GPIO header
• Operating Systems: Android, Debian, Ubuntu
• Power: DC 5V/2A
• Dimensions: 99mm x 69mm
• Weight: 65g
• Support: Development resources and forums available online.

• Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• H.265 (HEVC) (up to 4Kp60 decode), H.264 (up to 1080p60 decode, 1080p30 encode)
• OpenGL ES 3.0 graphics
• Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on variant)
• Options for 0GB (Lite), 8GB, 16GB or 32GB eMMC Flash memory (depending on variant)
• Option for fully certified radio module
• 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless
• Bluetooth 5.0, BLE
• On-board electronic switch to select either external or PCB trace antenna

Features of the Raspberry Pi 4 8GB RAM:

• 8GB of LPDDR4 RAM
• Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• Dual-band 802.11ac wireless
• Bluetooth 5.0, BLE
• Gigabit Ethernet
• 2 USB 3.0 ports
• 2 USB 2.0 ports
• 2 micro-HDMI ports (up to 4Kp60 supported)
• Supports Raspberry Pi OS, Ubuntu and other operating systems
• Versatile and flexible device for a wide range of projects and applications.

5 inch LCD Touch Screen Display with HDMI for Raspberry Pi 3, Pi2, Model B/B+

The 5 Inch Touch Screen HDMI Interface TFT LCD Module is a good solution for those who are seeking for a bigger resolution display.

This TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough!!! make use of stand-off screws included in this pack to put the Raspberry Pi on the display board. But while you do this please ensure that the HDMI ports of both the Display and the Pi would line up with each other so that you will take advantage of HDMI connector that we are providing in this product pack.

This 5 Inch Touch Screen HDMI Interface TFT LCD Module is a mini panel-mountable HDMI monitor. Small and simple, yet you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product.

It features efficient operation by equipping Backlight Power switch with which you can control the backlight whether to be on and off to save power. It has 13×2 Pin Socket from where one can get 5V Power from raspberry Pi to LCD and at the same time, transfer touch signal back to Raspberry Pi. It also features extended interface which is the replica of 13×2 Pin Socket.

Although the 800×480 common HDMI display is made for Raspberry Pi, you can use it on other compatible boards too.

• Orange Pi Zero uses the AllWinner H2 SoC, and has 256MB/512MB DDR3 SDRAM (256MB version is Standard version), It integrates TF card, 100 Ethernet network, USB 2.0, 26Pin headers, etc. lt is powered through USB OTG.

• Mini-router with dual Gbps Ethernet ports
• Uses Rockchip's quad-core A53 RK3328 SoC
• 1GB LPDDR3 memory
• Dual Gbps Ethernet ports
• USB 2.0
• 16MB SPI FLASH
• Powered through Type-C
• Can run OpenWRT, Ubuntu, and Debian operating systems.

• Dwin Hmi Display

• LG - 18650 - 3.7V - 2000Mah

• Camera Included: 5 MegaPixel Camera
• Connectivity: Connects to Raspberry Pi via the DSI port
• Resolution: Unknown
• Technology: Capacitive Touch Technology.

• After the test, all three thermal pads can reach and come in contact with the top cover case. We consider that it may be releated with some individual cases, there maybe some errors happened due to mass production.
• We will pay more attention to the armor case quality checking, please don't worry.

• Ultra-thin design
• Easy to install
• Fast Heat dissipation
• Smooth and straight aluminum material
• Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable.
• All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
• Open case design, you don't need to worry it will effect wifi signal any more
• Reinforced aluminum material, lightweight and durable, long-lasting stainless

• 1 x Raspberry Pi 4 Armor Case
• 1 x Screws Pack
• 1 x Wrench

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of onboard Flash memory
• The castellated module allows soldering directly to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 multi-function GPIO pins
• 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 Programmable I/O (PIO) state machines for custom peripheral support

• Set of 4 aluminum heat sinks
• Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B
• These heat sinks have profiles that are short enough to fit within standard Raspberry Pi cases.

• 1 x Black 4 in 1 Heat Sink Set Aluminum for Raspberry Pi 4B

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

Features:

● Self-designed T5L 8051 display control chip, 262K Color, 18bit, 320*240 Pixel;

● Capacitive touch screen(Glass+Glass structure, sensitivity could be adjusted for the use of extra front tempered glass or acrylic panel);

● TTL Interface, 50Pin-0.5mm FCC connection wire;

● Multiple user interfaces(I/Os, CAN, PWM, AD, UARTs) for debugging;

● SD card or DGUS TOOL on-line serial port downloading ways;

● DWIN DGUS V7.6 GUIs development, easy to use, 0 code quick developing;

● Dual development system: DGUS II(GUI tool with built-in UI modules) / TA(Hex commends instruction set), switched by download the kernel via SD card;

● IPS View Angle: 85/85/85/85 (L/R/U/D), free viewing angle;

● GUI & OS dual-core, GUI with rich built-in touch and display controls in DGUS tool. DWIN OS kernel is open to the user for the second-development, via DWIN OS programming language or KEIL C51 language.

DS3231 Module is a Bread Board friendly extremely precise I2C real time clock Module. This module made using DS3231 RTC and AT24C32 EEPROM integrated with temperature compensated crystal oscillator. It also has a built in comparator which monitors the status of VCC to detect power failures and to automatically switch to backup power supply. AT24C32 provides 32,768 bits of serial EEPROM organized as 4096 words of 8 bits each. This gives you 32Kb of non-volatile memory for your projects. This module can be easily interfaced with Arduino Boards, Raspberry Pi and all Microcontrollers.

• Orange Pi 3 LTS uses the Allwinner H6 SoC, and has 2GB LPDDR3 SDRAM, 8GB EMMC Flash. It can run Android 9, Ubuntu, Debian. Orange Pi 3 LTS offers a range of different ports, including HDMI output, 26pin headers, Gbps Ethernet port, 1*USB 3.0, 2* USB2.0，etc. It is powered through Type-C. It is a good choice for applications that need strong networking perfomance.

• Orange Pi R1 uses the AllWinner H2 SoC, with Quad-core 32-bit Cortex-A7 and 256MB/512MB DDR3 (shared with GPU).
• It integrates USB 2.0 port, TF card slot, 26 pin headers etc.
• It is powered through USB OTG.

The Raspberry Pi camera module can be used to take high-definition video, as well as stills photographs. It’s easy to use for beginners, but has plenty to offer advanced users if you’re looking to expand your knowledge. There are lots of examples online of people using it for time-lapse, slow-motion and other video cleverness. You can also use the libraries we bundle with the camera to create effects.

• A 5MP (2592×1944 pixels) Omnivision 5647 sensor in a fixed focus module
• Support 1080p30, 720p60 and 640x480p60/90 video record

• Orange Pi 4 LTS uses the Rockchip RK3399(28nm HKMG Process), and has 3 GB /4GB LPDDR4 SDRAM, 16GB EMMC Flash（option. It can run Android 8.1,Ubuntu16.04,Ubuntu18.04,Debian9. Orange Pi 4 LTS offers a range of different ports, including HDMI output, 26pin headers, LCD connector, Gbps Ethernet port, 2*USB 2.0, 1*USB 3.0, 1*USB 3.0 TYPE-C, mini PCIE connector etc. It is powered through DC and Type-C. It is a good choice for applications that need strong networking perfomance.